Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SSOP (0.209, 5.30mm Width) |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74LVT |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Additional Feature |
BROADSIDE VERSION OF 373 |
Technology |
BICMOS |
Voltage - Supply |
2.7V~3.6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
74LVT573 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
3.3V |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
3.6V |
Supply Voltage-Min (Vsup) |
2.7V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Number of Bits |
8 |
Propagation Delay |
2.7 ns |
Quiescent Current |
3mA |
Turn On Delay Time |
6.3 ns |
Family |
LVT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
32mA 64mA |
Logic Type |
D-Type Transparent Latch |
Number of Input Lines |
8 |
Independent Circuits |
1 |
Height Seated (Max) |
2mm |
Length |
7.2mm |
Width |
5.3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
74LVT573DB,112 Overview
It is embedded in the 20-SSOP (0.209, 5.30mm Width) package. It is packaged in the way of Tube. In its configuration, Tri-State is used as the output. This electrical device has Logic type D-Type Transparent Latch. Surface Mount is used to mount this electronic part. It operates at a voltage of 2.7V~3.6V. During operation, the temperature is set at -40°C~85°C. An FPGA of this type belongs to the 74LVT series. With this electronic part, there are 8 bits. This device has been designed with 20 terminations available. There is no doubt that it belongs to the family 74LVT573. In order to function, the supply voltage should be set to 3.3V. The device is equipped with 20 pins. This electronic device is categorized as a LVT electronic device. It is designed with 20 pins. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports that can be connected to it. It reaches 3.6V when the supply voltage (Vsup) reaches maximum. (Vsup) should be greater than 2.7V. In the circuit, there are 8 input lines that are constituted by an electronic circuit. Optimal efficiency requires 3.3V as the supply voltage. There are no external factors that affect it, so it consumes 3mA quiescent current. It also has characteristics of BROADSIDE VERSION OF 373.
74LVT573DB,112 Features
20-SSOP (0.209, 5.30mm Width) package
74LVT series
8 Bits
74LVT573 family
20 pin count
20 pins
74LVT573DB,112 Applications
There are a lot of Nexperia USA Inc. 74LVT573DB,112 Latches applications.
- A/D and D/A conversion
- Buffer register
- Programmable binary
- Stacked or Push-Down Registers
- Display driver
- Multistage ripple counting
- Synchronous frequency dividers
- Pseudo-random code generators
- Serial Output Register
- Data acquisition