74LVT574MTC
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LVT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Ports | 2 |
| Clock Frequency | 150MHz |
| Family | LVT |
| Current - Quiescent (Iq) | 190μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.6ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 5.3 ns |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74LVT574MTC Overview
The flip flop is packaged in a case of 20-TSSOP (0.173, 4.40mm Width). The Tubepackage contains it. Tri-State, Non-Invertedis the output configured for it. The trigger it is configured with uses Positive Edge. It is mounted in the way of Surface Mount. A voltage of 2.7V~3.6Vis required for its operation. -40°C~85°C TAis the operating temperature. D-Typeis the type of this D latch. FPGAs belonging to the 74LVTseries contain this type of chip. Its output frequency should not exceed 150MHz. The element count is 1 . During its operation, it consumes 190μA quiescent energy. 20terminations have occurred. Power is provided by a 3.3V supply. A 4pFfarad input capacitance is provided by this T flip flop. The electronic device belongs to the LVTfamily. As soon as 3.6Vis reached, Vsup reaches its maximum value. Normally, the supply voltage (Vsup) should be kept above 2.7V. The flip flop contains 2ports. Additionally, there are BROADSIDE VERSION OF 374 on the electronic flip flop that can be referred to.
74LVT574MTC Features
Tube package
74LVT series
74LVT574MTC Applications
There are a lot of Rochester Electronics, LLC 74LVT574MTC Flip Flops applications.
- Communications
- Matched Rise and Fall
- Latch-up performance
- Memory
- Test & Measurement
- Data storage
- Synchronous counter
- Count Modes
- Frequency division
- Safety Clamp
