74LVT574SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 481.5mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LVT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 2.7V~3.6V |
| Base Part Number | 74LVT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 5.3 ns |
| Turn On Delay Time | 4.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 190μA |
| Current - Output High, Low | 32mA 64mA |
| Max Propagation Delay @ V, Max CL | 4.6ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LVT574SJ Overview
It is packaged in the way of 20-SOIC (0.209, 5.30mm Width). The package Tubecontains it. Tri-State, Non-Invertedis the output configured for it. The trigger it is configured with uses Positive Edge. Surface Mountis occupied by this electronic component. Powered by a 2.7V~3.6Vvolt supply, it operates as follows. -40°C~85°C TAis the operating temperature. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74LVT series. It should not exceed 150MHzin its output frequency. In total, it contains 1 elements. As a result, it consumes 190μA quiescent current and is not affected by external forces. The 74LVT574family includes it. This JK flip flop has a 4pFfarad input capacitance. Surface Mount mounts this electronic component. There are 20pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. Using 8 circuits, it is highly flexible. It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency. There are no output lines on the JK flip flop.
74LVT574SJ Features
Tube package
74LVT series
20 pins
74LVT574SJ Applications
There are a lot of ON Semiconductor 74LVT574SJ Flip Flops applications.
- CMOS Process
- Memory
- Modulo – n – counter
- Data storage
- Count Modes
- Control circuits
- Set-reset capability
- Parallel data storage
- Safety Clamp
- Matched Rise and Fall
