74LVTH125DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2.7V~3.6V |
| Base Part Number | 74LVTH125 |
| Number of Outputs | 4 |
| Output Type | 3-State |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 4 |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Propagation Delay | 2.9 ns |
| Quiescent Current | 7mA |
| Turn On Delay Time | 6.5 ns |
| Logic Function | Buffer, Inverting |
| Number of Inputs | 4 |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Bits per Element | 1 |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Number of Input Lines | 4 |
| Number of Output Lines | 4 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74LVTH125DB,118 Overview
Logical driver uses a neat 14-SSOP (0.209, 5.30mm Width) package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 2.7V~3.6V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 32mA 64mA. Logical driver can deal with 3-State output (s). All of the 4 elements are put into use. Digital buffer is one of the 74LVTH series devices. Buffer IC is suitable for Surface Mount applications. Logical driver has 14 pins. The bus transceiver employs 1 bits for each element. You can search "74LVTH125" for other related electrical components. In quiescent state, the electronic part uses 7mA. To run the part safely and stably in a circuit, 3.3V recommends users apply 3.3V on the logical driver. 4 channels for high quality communication. Voltage buffer is capable of operating under temperature as low as -40°C. Digital buffer should operate with ambient temperature no higher than 85°C. Buffer driver outputs 64mA to its low level. In high level output mode, the electronic parts may conduct -32mA of current. Voltage used to run voltage buffer should be 2.7V at least. In regard to the maximum supply voltage, buffer driver is rated 3.6V. Wireless transceiver is able to output 4 lines. Because of its 4 lines level input capability, buffer IC is more cost-effective on transimitting signals. Supplier device package of this electronic part would be 14-SSOP. It is sufficient to make 4 outputs. Digital buffer is characterized to have 4 inputs.
74LVTH125DB,118 Features
High Level Output: 64mA
Low Level Output: -32mA
74LVTH125DB,118 Applications
There are a lot of Nexperia USA Inc. 74LVTH125DB,118 Buffers & Transceivers applications.
- Solenoids
- Telecom and datacom networking applications
- TV signal transmission
- Automation systems
- Interconnection between switches and computers
- Car alarm systems
- IP cameras
- SONET/SDH Network
- Satellite radio receiver
- Wireless communication
