74LVTH162374ZQLR
| Parameters | |
|---|---|
| Lifecycle Status | LIFEBUY (Last Updated: 3 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-VFBGA |
| Number of Pins | 56 |
| Weight | 58.28662mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| Type | D-Type |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVTH162374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 12mA |
| Number of Bits | 16 |
| Clock Frequency | 160MHz |
| Propagation Delay | 3.4 ns |
| Quiescent Current | 5mA |
| Turn On Delay Time | 3.4 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 190μA |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 12mA 12mA |
| Max Propagation Delay @ V, Max CL | 5.3ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 5.3 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1mm |
| Length | 7mm |
| Width | 4.5mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVTH162374ZQLR Overview
In the form of 56-VFBGA, it has been packaged. A package named Tape & Reel (TR)includes it. The output it is configured with uses Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A supply voltage of 2.7V~3.6V is required for operation. It is operating at a temperature of -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74LVTHseries FPGA. It should not exceed 160MHzin its output frequency. In total, it contains 2 elements. Despite external influences, it consumes 190μAof quiescent current. It has been determined that there have been 56 terminations. The 74LVTH162374 family contains it. Power is supplied from a voltage of 3.3V volts. Its input capacitance is 3pF farads. A device of this type belongs to the family of LVT. This electronic part is mounted in the way of Surface Mount. It is designed with 56 pins. It has a clock edge trigger type of Positive Edge. It is included in FF/Latches. Flip flops designed with 16bits are used in this part. As soon as 3.6Vis reached, Vsup reaches its maximum value. As a result of its reliability, this D flip flop is ideally suited for TR. A total of 2ports are embedded in the D flip flop. A high level of efficiency can be achieved by maintaining the supply voltage at 3.3V. This T flip flop features a maximum design flexibility due to its output current of 12mA. In order to operate, the chip has 8 output lines. There is 5mA quiescent current consumption by it.
74LVTH162374ZQLR Features
Tape & Reel (TR) package
74LVTH series
56 pins
16 Bits
74LVTH162374ZQLR Applications
There are a lot of Texas Instruments 74LVTH162374ZQLR Flip Flops applications.
- Frequency division
- Counters
- Event Detectors
- Common Clocks
- Reduced system switching noise
- Convert a momentary switch to a toggle switch
- Latch
- Automotive
- EMI reduction circuitry
- Guaranteed simultaneous switching noise level
