74LVTH162374ZRDR
| Parameters | |
|---|---|
| Lifecycle Status | LIFEBUY (Last Updated: 2 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 54-TFBGA |
| Number of Pins | 54 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74LVTH |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 54 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Base Part Number | 74LVTH162374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 12mA |
| Number of Bits | 16 |
| Clock Frequency | 160MHz |
| Propagation Delay | 3.4 ns |
| Quiescent Current | 5mA |
| Turn On Delay Time | 3.4 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 190μA |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 12mA 12mA |
| Max Propagation Delay @ V, Max CL | 5.3ns @ 3.3V, 50pF |
| Prop. Delay@Nom-Sup | 5.3 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.2mm |
| Length | 8mm |
| Width | 5.5mm |
| Thickness | 800μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVTH162374ZRDR Overview
The flip flop is packaged in a case of 54-TFBGA. It is contained within the Cut Tape (CT)package. Tri-State, Non-Invertedis the output configured for it. There is a trigger configured with Positive Edge. There is an electronic component mounted in the way of Surface Mount. It operates with a supply voltage of 2.7V~3.6V. In this case, the operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. The 74LVTHseries comprises this type of FPGA. Its output frequency should not exceed 160MHz. A total of 2elements are present in it. As a result, it consumes 190μA quiescent current. There are 54 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This D latch belongs to the family of 74LVTH162374. The power supply voltage is 3.3V. Input capacitance of this device is 3pF farads. An electronic device belonging to the family LVTcan be found here. There is an electronic part mounted in the way of Surface Mount. This board has 54 pins. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. It is designed with a number of bits of 16. It reaches 3.6Vwhen the supply voltage is maximal (Vsup). In light of its reliable performance, this T flip flop is well suited for TR. A D flip flop with 2embedded ports is available. It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency. With a current output of 12mA , it offers maximum design flexibility. It operates with 8 output lines. It consumes 5mA current.
74LVTH162374ZRDR Features
Cut Tape (CT) package
74LVTH series
54 pins
16 Bits
74LVTH162374ZRDR Applications
There are a lot of Texas Instruments 74LVTH162374ZRDR Flip Flops applications.
- Latch-up performance
- Automotive
- Consumer
- Synchronous counter
- Control circuits
- 2 – Bit synchronous counter
- Safety Clamp
- Storage registers
- Buffer registers
- Bus hold
