74LVTH16373MTDX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74LVTH16373 |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Ports | 2 |
| Nominal Supply Current | 5mA |
| Number of Bits | 16 |
| Propagation Delay | 3.9 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 4 |
| Number of Output Lines | 3 |
| Width | 6.1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LVTH16373MTDX Overview
48-TFSOP (0.240, 6.10mm Width) contains it. A package of Tape & Reel (TR) has been used. It uses the output configuration Tri-State. This electrical device has Logic type D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. In order for it to operate, it needs a supply voltage of 2.7V~3.6V. It is -40°C~85°C at the operating temperature. The 74LVTH series of FPGAs is the one this FPGA belongs to. 16 Bits are used in the design of this electronic part. The device consists of 48 terminations that are designed to be used in conjunction with it. 74LVTH16373 is its family. The supply voltage of the device is 3.3V. In the world of electronics, this electronic device belongs to the family of LVT. With the design of the board, there are only 48 pins. Surface Mount is the method used for mounting this electronic part. This device has 2 ports. In the circuit, there are 4 input lines that are constituted by an electronic circuit. A high efficiency supply voltage should be maintained at 3.3V. 3 output lines generate the binary equivalent of the input lines. A total of 2 elements make up this object.
74LVTH16373MTDX Features
48-TFSOP (0.240, 6.10mm Width) package
74LVTH series
16 Bits
74LVTH16373 family
48 pins
2 elements
74LVTH16373MTDX Applications
There are a lot of ON Semiconductor 74LVTH16373MTDX Latches applications.
- Pattern generators
- Stacked or Push-Down Registers
- Double bus register system
- Counting
- Counter control
- Display driver
- Motor Drives
- Timers
- Avionics
- Counter timers
