74LVTH18512DGGRE4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 64 |
| Weight | 262.601633mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 64 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | SUPPORTS IEEE STANDARD 1149.1-1990 BOUNDARY SCAN |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2.7V |
| Number of Ports | 2 |
| Number of Bits | 18 |
| Propagation Delay | 20 ns |
| Quiescent Current | 18mA |
| Family | LVT |
| Logic Function | Transceiver |
| Direction | Bidirectional |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Prop. Delay@Nom-Sup | 4.9 ns |
| Trigger Type | POSITIVE EDGE |
| High Level Output Current | 64mA |
| Low Level Output Current | 32mA |
| Control Type | INDEPENDENT CONTROL |
| Translation | N/A |
| Length | 17mm |
| Width | 6.1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LVTH18512DGGRE4 Overview
The package TSSOP contains this file embedded in it. The package is packaged in the way that Tape and Reel would package it. There are a number of termination types, including 64 terminations, which is the term that refers to the practice of terminating a transmission line with a device that matches the characteristic impedance of the line. In order to maintain normal operation of the device, the supply voltage should remain above 3.3V. There are 64 pins on it. This electronic part is designed with 18 Bits. It is possible to terminate a transmission line with a device that matches the line's characteristic impedance, known as 2 terminations. Surface Mount is used to mount this electronic part. The 64 pins are designed into it. There is an electronic device in this family called LVT. 2 elements are included in it. It is configured with a trigger that uses POSITIVE EDGE. In addition to this, SUPPORTS IEEE STANDARD 1149.1-1990 BOUNDARY SCAN is another characteristic of it. Supply voltage 3.3V is used by this electrical part. There is no influence of external factors on 18mA of quiescent current in this case. It is operated by a voltage of 2.7V as the minimum supply voltage. It supports the maximal supply voltage of 3.6V. As a result of this, 64mA is the current that is being output at high levels. There should be a higher operating temperature than -40°C during the operation. It is ideal to have an operating temperature that is lower than 85°C.
74LVTH18512DGGRE4 Features
TSSOP package
64 pin count
64 pins
2 elements
74LVTH18512DGGRE4 Applications
There are a lot of Texas Instruments 74LVTH18512DGGRE4 Universal Bus Functions applications.
- Small ground power station
- Alarm circuit using LDR
- Automatic watering system
- Induction cooker
- Overvoltage and undervoltage protection
- Car refrigerator
- Cell phone
- Automatic watering system
- Washing machine
- Electric car
