74LVTH322374ZKER
| Parameters | |
|---|---|
| Lifecycle Status | LIFEBUY (Last Updated: 2 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 96-LFBGA |
| Number of Pins | 96 |
| Weight | 166.610147mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 96 |
| Type | D-Type |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LVTH322374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 4 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2.7V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 12mA |
| Number of Bits | 32 |
| Clock Frequency | 160MHz |
| Propagation Delay | 3.4 ns |
| Quiescent Current | 10mA |
| Turn On Delay Time | 3.4 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 380μA |
| Current - Output High, Low | 12mA 12mA |
| Max I(ol) | 0.012 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 5.3ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Output Lines | 3 |
| Count Direction | BIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 160000000Hz |
| Height | 1.4mm |
| Length | 13.5mm |
| Width | 5.5mm |
| Thickness | 850μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVTH322374ZKER Overview
96-LFBGAis the way it is packaged. D flip flop is embedded in the Tape & Reel (TR) package. T flip flop uses Tri-State, Non-Invertedas the output. There is a trigger configured with Positive Edge. It is mounted in the way of Surface Mount. The supply voltage is set to 2.7V~3.6V. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. JK flip flop is a part of the 74LVTHseries of FPGAs. You should not exceed 160MHzin its output frequency. D latch consists of 4 elements. It consumes 380μA of quiescent In 96terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. If you search by 74LVTH322374, you will find similar parts. The power source is powered by 3.3V. Its input capacitance is 3pFfarads. A device of this type belongs to the family of LVT. This electronic part is mounted in the way of Surface Mount. 96pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. This flip flop is designed with 32 Bits. It is imperative that the supply voltage (Vsup) is maintained above 2.7Vin order to ensure normal operation. This D flip flop is well suited for TR based on its reliable performance. The D flip flop is embedded with 2ports. For high efficiency, the supply voltage should be kept at 3.3V. In addition to its maximum design flexibility, the output current of the T flip flop is 12mA. It is designed with 3 output lines. This D latch consumes 10mA quiescent current at all.
74LVTH322374ZKER Features
Tape & Reel (TR) package
74LVTH series
96 pins
32 Bits
74LVTH322374ZKER Applications
There are a lot of Texas Instruments 74LVTH322374ZKER Flip Flops applications.
- Differential Individual
- Digital electronics systems
- Patented noise
- Storage Registers
- ESCC
- Functionally equivalent to the MC10/100EL29
- ESD protection
- Modulo – n – counter
- ESD performance
- Bus hold
