74LVTH373SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74LVTH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Base Part Number | 74LVTH373 |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Ports | 2 |
| Nominal Supply Current | 5mA |
| Number of Bits | 8 |
| Propagation Delay | 4.5 ns |
| Turn On Delay Time | 1.5 ns |
| Family | LVT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 2 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LVTH373SJ Overview
In the 20-SOIC (0.209, 5.30mm Width) package, it is embedded. A Tube package is used to package it. The output it is configured with uses Tri-State. In this electrical device, the logic type is D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. It operates with a supply voltage of 2.7V~3.6V. A temperature of -40°C~85°C is used for operation. 74LVTH is the series number of this FPGA. This electronic part is designed with 8 Bits. In this device, there are 20 terminations. There is no doubt that it belongs to the family 74LVTH373. With a supply voltage of 3.3V, it operates. In the world of electronics, this electronic device belongs to the family of LVT. In addition, it is designed with a pin number of 20. The electronic part is mounted using the Surface Mount method. As far as ports are concerned, this device has 2 ports. There are electronic circuits attached to the 2 input lines. A high efficiency supply voltage should be maintained at 3.3V. Input lines are converted into binary equivalents by 3 output lines.
74LVTH373SJ Features
20-SOIC (0.209, 5.30mm Width) package
74LVTH series
8 Bits
74LVTH373 family
20 pins
74LVTH373SJ Applications
There are a lot of ON Semiconductor 74LVTH373SJ Latches applications.
- Display
- General-Purpose Register
- Serial Output Data Queuing
- Accumulator Registers
- Automotive Cluster
- Up-Down Johnson
- Automotive Infotainment
- Ring counter
- Parallel data storage
- Programmable binary
