74LVTH574MTCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 18 hours ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 191mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVTH |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVTH574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 3.3V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 150MHz |
| Propagation Delay | 5.3 ns |
| Turn On Delay Time | 4.5 ns |
| Family | LVT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 190μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 4.6ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVTH574MTCX Overview
20-TSSOP (0.173, 4.40mm Width)is the packaging method. There is an embedded version in the package Tape & Reel (TR). T flip flop uses Tri-State, Non-Invertedas the output. JK flip flop uses Positive Edgeas the trigger. It is mounted in the way of Surface Mount. A voltage of 2.7V~3.6Vis used as the supply voltage. It is operating at -40°C~85°C TA. A flip flop of this type is classified as a D-Type. It belongs to the 74LVTHseries of FPGAs. Its output frequency should not exceed 150MHz Hz. The element count is 1 . Despite external influences, it consumes 190μAof quiescent current. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. You can search similar parts based on 74LVTH574. The power supply voltage is 3.3V. Its input capacitance is 4pF farads. LVTis the family of this D flip flop. A part of the electronic system is mounted in the way of Surface Mount. It is designed with 20 pins. This device exhibits a clock edge trigger type of Positive Edge. The part is included in FF/Latches. This flip flop is designed with 8 Bits. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2.7V. The superior flexibility of this product is achieved by using 8 circuits. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. The flip flop has 2embedded ports. A high level of efficiency can be achieved by maintaining the supply voltage at 3.3V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
74LVTH574MTCX Features
Tape & Reel (TR) package
74LVTH series
20 pins
8 Bits
74LVTH574MTCX Applications
There are a lot of ON Semiconductor 74LVTH574MTCX Flip Flops applications.
- Communications
- Load Control
- Data Synchronizers
- Count Modes
- High Performance Logic for test systems
- Single Up Count-Control Line
- Storage registers
- Memory
- Control circuits
- Latch
