74LVX174MX
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVX |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~3.6V |
| Frequency | 180MHz |
| Base Part Number | 74LVX174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 7 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2V |
| Number of Bits | 6 |
| Clock Frequency | 95MHz |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 9.3 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 12.8ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -4mA |
| Input Capacitance | 4pF |
| Low Level Output Current | 4mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 6 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
74LVX174MX Overview
It is embeded in 16-SOIC (0.154, 3.90mm Width) case. As part of the package Tape & Reel (TR), it is embedded. Currently, the output is configured to use Non-Inverted. This trigger uses the value Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 2V~3.6Vis required for its operation. -40°C~85°C TAis the operating temperature. It is an electronic flip flop with the type D-Type. It belongs to the 74LVXseries of FPGAs. A frequency of 95MHzshould be the maximum output frequency. A total of 1elements are contained within it. It consumes 4μA of quiescent The 74LVX174 family contains it. Input capacitance of this device is 4pF farads. It is mounted in the way of Surface Mount. Basically, it is designed with a set of 16 pins. Its clock edge trigger type is Positive Edge. There are 6bits in its design. To achieve this superior flexibility, 7 circuits are used. There are no output lines on the JK flip flop. This input has 3lines in it. -4mA is set as the high level output current. There is no low level output current set at 4mA. The operating temperature should be lower than 85°C. It is recommended that the operating temperature be greater than -40°C. It is powered by 2V as its minimum supply voltage. It supports the maximal supply voltage of 3.6V. This frequency can be achieved 180MHz.
74LVX174MX Features
Tape & Reel (TR) package
74LVX series
16 pins
6 Bits
74LVX174MX Applications
There are a lot of ON Semiconductor 74LVX174MX Flip Flops applications.
- Individual Asynchronous Resets
- Buffer registers
- Clock pulse
- Test & Measurement
- Functionally equivalent to the MC10/100EL29
- ESD protection
- Latch
- CMOS Process
- Shift Registers
- Circuit Design
