74LVX273MTC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 191mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LVX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVX273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Output Current | 20mA |
| Number of Bits | 8 |
| Clock Frequency | 90MHz |
| Propagation Delay | 20 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 7.1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 14.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 50000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVX273MTC Overview
It is embeded in 20-TSSOP (0.173, 4.40mm Width) case. There is an embedded version in the package Tube. Currently, the output is configured to use Non-Inverted. It is configured with a trigger that uses Positive Edge. Surface Mountis positioned in the way of this electronic part. It operates with a supply voltage of 2V~3.6V. A temperature of -40°C~85°C TAis considered to be the operating temperature. This D latch has the type D-Type. The FPGA belongs to the 74LVX series. Its output frequency should not exceed 90MHz. The list contains 1 elements. Currently, there are 20 terminations. The 74LVX273 family contains this object. The power source is powered by 2.7V. This JK flip flop has a 4pFfarad input capacitance. It belongs to the family of electronic devices known as LV/LV-A/LVX/H. There is an electronic part that is mounted in the way of Surface Mount. The 20pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. The RS flip flops belongs to FF/Latches base part number. The flip flop is designed with 8bits. A normal operating voltage (Vsup) should remain above 2V. The superior flexibility of this circuit is achieved by using 8 circuits. Its output current of 20mAallows for maximum design flexibility. It is reported that there are 3 input lines. It consumes 4μA of quiescent current without being affected by external factors.
74LVX273MTC Features
Tube package
74LVX series
20 pins
8 Bits
74LVX273MTC Applications
There are a lot of ON Semiconductor 74LVX273MTC Flip Flops applications.
- Buffer registers
- Data transfer
- Bounce elimination switch
- Guaranteed simultaneous switching noise level
- Count Modes
- Shift registers
- Cold spare funcion
- Storage registers
- Computers
- Circuit Design
