74LVX273MTCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 191mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LVX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74LVX273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 90MHz |
| Propagation Delay | 24 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 7.1 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 14.5ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 50000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVX273MTCX Overview
The package is in the form of 20-TSSOP (0.173, 4.40mm Width). There is an embedded version in the package Tape & Reel (TR). Currently, the output is configured to use Non-Inverted. JK flip flop uses Positive Edgeas the trigger. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to 2V~3.6V. -40°C~85°C TAis the operating temperature. The type of this D latch is D-Type. The FPGA belongs to the 74LVX series. There should be no greater frequency than 90MHzon its output. A total of 1elements are contained within it. There are 20 terminations,The 74LVX273 family contains this object. A voltage of 2.7V is used as the power supply for this D latch. Its input capacitance is 4pFfarads. In this case, the D flip flop belongs to the LV/LV-A/LVX/Hfamily. There is an electronic part that is mounted in the way of Surface Mount. There are 20pins on it. Its clock edge trigger type is Positive Edge. This part is included in FF/Latches. There are 8bits in this flip flop. The supply voltage (Vsup) should be kept above 2V for normal operation. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. It is reported that there are 3 input lines. Despite external influences, it consumes 4μAof quiescent current. 8 channels are available.
74LVX273MTCX Features
Tape & Reel (TR) package
74LVX series
20 pins
8 Bits
74LVX273MTCX Applications
There are a lot of ON Semiconductor 74LVX273MTCX Flip Flops applications.
- Frequency Dividers
- CMOS Process
- Load Control
- ESCC
- Modulo – n – counter
- ATE
- Event Detectors
- Guaranteed simultaneous switching noise level
- Storage Registers
- Control circuits
