74LVX574M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LVX |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.7V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74LVX574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 75MHz |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 8.5 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 16.7ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 45000000Hz |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LVX574M Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). D flip flop is embedded in the Tube package. The output it is configured with uses Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 2V~3.6Vis used as the supply voltage. It is operating at a temperature of -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. In terms of FPGAs, it belongs to the 74LVX series. A frequency of 75MHzshould not be exceeded by its output. The list contains 1 elements. As a result, it consumes 4μA of quiescent current without being affected by external factors. A total of 20 terminations have been made. The 74LVX574family includes it. It is powered by a voltage of 2.7V . This JK flip flop has a 4pFfarad input capacitance. Devices in the LV/LV-A/LVX/Hfamily are electronic devices. Electronic part Surface Mountis mounted in the way. A total of 20pins are provided on this board. This device exhibits a clock edge trigger type of Positive Edge. It is included in FF/Latches. It is designed with a number of bits of 8. It reaches 3.6Vwhen the supply voltage is maximal (Vsup). Normal operation requires a supply voltage (Vsup) above 2V. The superior flexibility of this circuit is achieved by using 8 circuits. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. A power supply of 3.3Vis required to operate it. There are 2 ports embedded in the flip flops.
74LVX574M Features
Tube package
74LVX series
20 pins
8 Bits
3.3V power supplies
74LVX574M Applications
There are a lot of ON Semiconductor 74LVX574M Flip Flops applications.
- Counters
- Cold spare funcion
- Functionally equivalent to the MC10/100EL29
- ESD protection
- Data Synchronizers
- Storage Registers
- Single Up Count-Control Line
- Test & Measurement
- EMI reduction circuitry
- Single Down Count-Control Line
