74LVX574SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74LVX |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 2V~3.6V |
| Frequency | 125MHz |
| Base Part Number | 74LVX574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 2V |
| Number of Bits | 8 |
| Clock Frequency | 75MHz |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 8.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 16.7ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -4mA |
| Input Capacitance | 4pF |
| Low Level Output Current | 4mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74LVX574SJ Overview
20-SOIC (0.209, 5.30mm Width)is the way it is packaged. The package Tubecontains it. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. A voltage of 2V~3.6Vis used as the supply voltage. In the operating environment, the temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. In FPGA terms, D flip flop is a type of 74LVXseries FPGA. You should not exceed 75MHzin its output frequency. There are 1 elements in it. This process consumes 4μA quiescents. Members of the 74LVX574family make up this object. Input capacitance of this device is 4pF farads. A part of the electronic system is mounted in the way of Surface Mount. A total of 20pins are provided on this board. There is a clock edge trigger type of Positive Edgeon this device. This flip flop is designed with 8 Bits. The superior flexibility is achieved through the use of 8 circuits. The JK flip flop is with 8 output lines to operate. It is reported that there are 1 input lines. High level output current is set to -4mA. The low level output current is set to 4mA. The operating temperature should be lower than 85°C. The operating temperature should be higher than -40°C. In order for it to operate, a supply voltage of 2Vis required. There is a maximum supply voltage of 3.6V. This can be achieved at a frequency of 125MHz.
74LVX574SJ Features
Tube package
74LVX series
20 pins
8 Bits
74LVX574SJ Applications
There are a lot of ON Semiconductor 74LVX574SJ Flip Flops applications.
- Balanced Propagation Delays
- Latch
- Convert a momentary switch to a toggle switch
- Set-reset capability
- Data Synchronizers
- Pattern generators
- Shift registers
- Balanced 24 mA output drivers
- Instrumentation
- Clock pulse
