74LVX74MX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 240.999296mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | 74LVX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 2.7V |
| Base Part Number | 74LVX74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 85MHz |
| Propagation Delay | 19.1 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 5.7 ns |
| Family | LV/LV-A/LVX/H |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 13.2ns @ 3.3V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 4 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 50000000Hz |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74LVX74MX Overview
14-SOIC (0.154, 3.90mm Width)is the way it is packaged. The package Tape & Reel (TR)contains it. There is a Differentialoutput configured with it. This trigger is configured to use Positive Edge. It is mounted in the way of Surface Mount. Powered by a 2V~3.6Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis considered to be the operating temperature. This logic flip flop is classified as type D-Type. The 74LVXseries comprises this type of FPGA. Its output frequency should not exceed 85MHz. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. D latch belongs to the 74LVX74 family. The power source is powered by 2.7V. This JK flip flop has a 4pFfarad input capacitance. Devices in the LV/LV-A/LVX/Hfamily are electronic devices. It is mounted in the way of Surface Mount. This board is designed with 14pins on it. A Positive Edgeclock edge trigger is used in this device. This device is part of the FF/Latchesbase part number family. Vsup reaches 3.6V, the maximal supply voltage. A normal operating voltage (Vsup) should remain above 2V. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires 3.3V power supplies. It has 4lines. There is a consumption of 2μAof quiescent current from it. There are 2 channels available.
74LVX74MX Features
Tape & Reel (TR) package
74LVX series
14 pins
3.3V power supplies
74LVX74MX Applications
There are a lot of ON Semiconductor 74LVX74MX Flip Flops applications.
- Storage registers
- Storage Registers
- ESD protection
- Single Down Count-Control Line
- Digital electronics systems
- Frequency Dividers
- Buffered Clock
- Buffer registers
- Divide a clock signal by 2 or 4
- Reduced system switching noise
