74V1G66STR
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Resistance | 10Ohm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74V1G66 |
| Pin Count | 5 |
| Polarity | Non-Inverting |
| Number of Channels | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Max Supply Current | 1μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 4 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 7.5 ns |
| -3db Bandwidth | 180MHz |
| On-State Resistance (Max) | 10Ohm |
| High Level Output Current | 50mA |
| Low Level Output Current | 50mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 4ns, 7.5ns |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Normal Position | NO |
| Length | 2.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74V1G66STR Overview
As the electronic part is packed in SC-74A, SOT-753, international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. Operating temperature around -55°C~125°C TA extended. The total number of terminations is 5. As a result of its 1 channels, this electronic component provides high-quality output. Powered by a 3.3V voltage supply, the electrical part should be switched on and run. A key feature of the 5 series is the inclusion of this electronic part as part of its design. Multiplexers built on a SPST - NO switching circuit are built. Using the 74V1G66 search parameter, you can discover variants of the switch. This digital multiplexer has 10Ohm internal resistance. For details about the functions of 5 pins, please refer to the datasheets. This switch device is a typical Multiplexer or Switches. Multiplexers should not be powered above 5.5V in normal situations. Analog switch ics with Single supply type are cost-effective. A low voltage of 2V should be applied to the electronic component. An analogue multiplexer drains from a single voltage supply at 2V~5.5V. The analogue multiplexer may be damaged if voltage is greater than 1μA.
74V1G66STR Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 180MHz
74V1G66STR Applications
There are a lot of STMicroelectronics 74V1G66STR Analog Switches & Multiplexers ICs applications.
- Fiber In The Loop (FITL)
- Medical Instrumentation
- T1/E1 Terminals
- Communications systems
- Remote Powered Equipment
- Private Branch Exchange (PBX)
- Microwave transmission systems
- Wireless Local Loop
- Digital access cross connects
- Relay replacements
