74VCX162374MTD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Supplier Device Package | 48-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74VCX |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 1.4V~3.6V |
| Frequency | 250MHz |
| Base Part Number | 74VCX162374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.4V |
| Number of Bits | 16 |
| Clock Frequency | 250MHz |
| Propagation Delay | 9.6 ns |
| Turn On Delay Time | 3.4 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 12mA 12mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 3.4ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -12mA |
| Input Capacitance | 6pF |
| Low Level Output Current | 12mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 16 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74VCX162374MTD Overview
48-TFSOP (0.240, 6.10mm Width)is the way it is packaged. D flip flop is embedded in the Tube package. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at 1.4V~3.6Vvolts. It is operating at a temperature of -40°C~85°C TA. D-Typedescribes this flip flop. FPGAs belonging to the 74VCXseries contain this type of chip. You should not exceed 250MHzin its output frequency. There are 2 elements in it. There is a consumption of 20μAof quiescent energy. The 74VCX162374family includes it. A JK flip flop with a 6pFfarad input capacitance is used here. Electronic part Surface Mountis mounted in the way. With its 48pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. It is designed with 16bits. The superior flexibility of this circuit is achieved by using 2 circuits. The JK flip flop is with 16 output lines to operate. A total of 2input lines have been provided. -12mAis the output current at high level. The low level output current is set to 12mA. Temperatures below 85°Care ideal for operating. It is recommended that the operating temperature be greater than -40°C. It is powered by 1.4V as its minimum supply voltage. There is a maximum voltage support of 3.6V. A frequency of 250MHzcan be achieved.
74VCX162374MTD Features
Tube package
74VCX series
48 pins
16 Bits
74VCX162374MTD Applications
There are a lot of ON Semiconductor 74VCX162374MTD Flip Flops applications.
- Divide a clock signal by 2 or 4
- Matched Rise and Fall
- Storage registers
- Power down protection
- Guaranteed simultaneous switching noise level
- CMOS Process
- Individual Asynchronous Resets
- Reduced system switching noise
- Latch-up performance
- Synchronous counter
