74VCX16374MTDX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 421mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | 74VCX |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 1.2V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74VCX16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Load Capacitance | 30pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Clock Frequency | 250MHz |
| Propagation Delay | 7.8 ns |
| Quiescent Current | 20μA |
| Turn On Delay Time | 1.5 ns |
| Family | ALVC/VCX/A |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 3ns @ 3.3V, 30pF |
| Prop. Delay@Nom-Sup | 3 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 6pF |
| Number of Input Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 900μm |
| Length | 12.5mm |
| Width | 6.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VCX16374MTDX Overview
48-TFSOP (0.240, 6.10mm Width)is the way it is packaged. The package Tape & Reel (TR)contains it. This output is configured with Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountis in the way of this electric part. A voltage of 1.2V~3.6Vis used as the supply voltage. The operating temperature is -40°C~85°C TA. D-Typeis the type of this D latch. In this case, it is a type of FPGA belonging to the 74VCX series. There should be no greater frequency than 250MHzon its output. Currently, there are 48 terminations. The 74VCX16374 family contains it. A voltage of 1.5V is used as the power supply for this D latch. There is 6pF input capacitance for this T flip flop. Electronic devices of this type belong to the ALVC/VCX/Afamily. The electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 48. It has a clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. The design is based on 16bits. As soon as 3.6Vis reached, Vsup reaches its maximum value. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires 3.3V power supplies. The flip flop contains 2ports. A total of 2input lines have been provided. There is 20μA quiescent current consumption by it.
74VCX16374MTDX Features
Tape & Reel (TR) package
74VCX series
48 pins
16 Bits
3.3V power supplies
74VCX16374MTDX Applications
There are a lot of ON Semiconductor 74VCX16374MTDX Flip Flops applications.
- Asynchronous counter
- Safety Clamp
- Synchronous counter
- Supports Live Insertion
- CMOS Process
- Guaranteed simultaneous switching noise level
- 2 – Bit synchronous counter
- Single Up Count-Control Line
- Differential Individual
- Frequency Dividers
