74VCX16821MTDX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 56 |
| Supplier Device Package | 56-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74VCX |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 1.4V~3.6V |
| Frequency | 250MHz |
| Base Part Number | 74VCX16821 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.4V |
| Number of Bits | 20 |
| Clock Frequency | 250MHz |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 1.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 10 |
| Max Propagation Delay @ V, Max CL | 3.5ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 6pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 20 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74VCX16821MTDX Overview
The flip flop is packaged in a case of 56-TFSOP (0.240, 6.10mm Width). It is contained within the Tape & Reel (TR)package. Currently, the output is configured to use Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. A 1.4V~3.6Vsupply voltage is required for it to operate. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This logic flip flop is classified as type D-Type. It belongs to the 74VCXseries of FPGAs. Its output frequency should not exceed 250MHz. There are 2 elements in it. T flip flop consumes 20μA quiescent energy. D latch belongs to the 74VCX16821 family. A JK flip flop with a 6pFfarad input capacitance is used here. A part of the electronic system is mounted in the way of Surface Mount. With its 56pins, it is designed to work with most electronic flip flops. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. There are 20bits in its design. The superior flexibility of this product is achieved by using 2 circuits. It has 20 output lines to operate. This input has 2lines. In this case, the high level output current is set to -24mA. The low level output current is set to 24mA. Operating temperatures should be lower than 85°C. It is recommended that the operating temperature is higher than -40°C. The minimal supply voltage is 1.4V. The maximum supply voltage supported by the flip flop is 3.6V. It is possible to obtain a frequency of 250MHz.
74VCX16821MTDX Features
Tape & Reel (TR) package
74VCX series
56 pins
20 Bits
74VCX16821MTDX Applications
There are a lot of ON Semiconductor 74VCX16821MTDX Flip Flops applications.
- Latch
- Frequency division
- Patented noise
- Shift registers
- Computing
- Communications
- Guaranteed simultaneous switching noise level
- Safety Clamp
- Balanced Propagation Delays
- Consumer
