banner_page

74VCXH162373MTX

D-Type, Latch 1.4V~3.6V 16 Bits Tri-State Latches 74VCXH Series 74VCXH162373 48-TFSOP (0.240, 6.10mm Width)


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-74VCXH162373MTX
  • Package: 48-TFSOP (0.240, 6.10mm Width)
  • Datasheet: PDF
  • Stock: 401
  • Description: D-Type, Latch 1.4V~3.6V 16 Bits Tri-State Latches 74VCXH Series 74VCXH162373 48-TFSOP (0.240, 6.10mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-TFSOP (0.240, 6.10mm Width)
Number of Pins 48
Supplier Device Package 48-TSSOP
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74VCXH
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Voltage - Supply 1.4V~3.6V
Base Part Number 74VCXH162373
Output Type Tri-State
Number of Elements 2
Circuit 8:8
Polarity Non-Inverting
Number of Circuits 2
Max Supply Voltage 3.6V
Min Supply Voltage 1.4V
Number of Bits 16
Propagation Delay 3.3 ns
Turn On Delay Time 1 ns
Logic Function D-Type, Latch
Current - Output High, Low 12mA 12mA
Logic Type D-Type Transparent Latch
High Level Output Current -12mA
Low Level Output Current 12mA
Number of Input Lines 4
Independent Circuits 2
Number of Output Lines 4
Delay Time - Propagation 1ns
RoHS Status RoHS Compliant
Lead Free Lead Free

74VCXH162373MTX Overview


In the package 48-TFSOP (0.240, 6.10mm Width), it can be found. Tape & Reel (TR) is the packaging method. The output it is configured with uses Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. A Surface Mount mount is used for mounting this electronic part. There is no supply voltage for this device. A temperature of -40°C~85°C is used for operation. The 74VCXH series is associated with this FPGA. This electronic part is designed with 16 Bits. The family 74VCXH162373 includes it. Designed with 48 pins, it is compatible with a wide range of devices. Mounting this electronic component follows the Surface Mount method. There are 4 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Input lines are converted into binary equivalents by 4 output lines. This element consists of 2. In order to achieve its superior flexibility, 2 circuits are used. The low level output current is set to 12mA. -12mA represents the high level output current. Ideally, the temperature should not be higher than 85°C. It is recommended that the operating temperature be higher than -40°C. It supports a maximum supply voltage of 3.6V. This device requires a minimum voltage of 1.4V.

74VCXH162373MTX Features


48-TFSOP (0.240, 6.10mm Width) package
74VCXH series
16 Bits
74VCXH162373 family
48 pins
2 elements

74VCXH162373MTX Applications


There are a lot of ON Semiconductor 74VCXH162373MTX Latches applications.

  • Control circuits
  • A/D and D/A conversion
  • Counting
  • Data acquisition
  • TV Set-top Boxes
  • Four-bit storage with output enable
  • Phase comparator
  • Decade counting
  • Counter
  • A/D converters

Write a review

Note: HTML is not translated!
    Bad           Good