74VCXH16374MTDX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Supplier Device Package | 48-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74VCXH |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 1.4V~3.6V |
| Frequency | 250MHz |
| Base Part Number | 74VCXH16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.4V |
| Number of Bits | 16 |
| Clock Frequency | 250MHz |
| Propagation Delay | 7.8 ns |
| Turn On Delay Time | 1.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 20μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 3ns @ 3.3V, 30pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 6pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 16 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74VCXH16374MTDX Overview
The flip flop is packaged in a case of 48-TFSOP (0.240, 6.10mm Width). As part of the package Tape & Reel (TR), it is embedded. In the configuration, Tri-State, Non-Invertedis used as the output. The trigger it is configured with uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 1.4V~3.6V volts. Currently, the operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. The 74VCXHseries comprises this type of FPGA. Its output frequency should not exceed 250MHz. D latch consists of 2 elements. T flip flop consumes 20μA quiescent energy. The 74VCXH16374 family contains it. Its input capacitance is 6pF farads. It is mounted in the way of Surface Mount. 48pins are included in its design. This device has the clock edge trigger type of Positive Edge. There are 16bits in its design. Its superior flexibility is attributed to its use of 2 circuits. There are 16 output lines in this JK flip flop. Currently, there are 2 input lines present. High level output current is set to -24mA. Low level output current is set to 24mA. There should be a temperature below 85°Cduring operation. Temperatures above -40°Cshould be used. The minimum voltage required for operation is 1.4V. It supports the maximal supply voltage of 3.6V. The frequency that can be achieved is 250MHz.
74VCXH16374MTDX Features
Tape & Reel (TR) package
74VCXH series
48 pins
16 Bits
74VCXH16374MTDX Applications
There are a lot of ON Semiconductor 74VCXH16374MTDX Flip Flops applications.
- Reduced system switching noise
- Patented noise
- Computers
- Communications
- Bus hold
- Storage registers
- ATE
- Safety Clamp
- Control circuits
- Shift registers
