74VHC112MX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 143mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74VHC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | JK Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Base Part Number | 74VHC112 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Clock Frequency | 185MHz |
| Propagation Delay | 16.5 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 5.1 ns |
| Family | AHC/VHC |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10.5ns @ 5V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 5 |
| Clock Edge Trigger Type | Negative Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC112MX Overview
In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. The Tape & Reel (TR)package contains it. It is configured with Differentialas an output. There is a trigger configured with Negative Edge. It is mounted in the way of Surface Mount. With a supply voltage of 2V~5.5V volts, it operates. Temperature is set to -40°C~85°C TA. It belongs to the type JK Typeof flip flops. The FPGA belongs to the 74VHC series. It should not exceed 185MHzin terms of its output frequency. There have been 16 terminations. You can search similar parts based on 74VHC112. It is powered by a voltage of 3.3V . A JK flip flop with a 4pFfarad input capacitance is used here. Electronic devices of this type belong to the AHC/VHCfamily. It is mounted by the way of Surface Mount. 16pins are included in its design. In this device, the clock edge trigger type is Negative Edge. It is included in FF/Latches. The supply voltage (Vsup) should be maintained above 2V for normal operation. Its superior flexibility is attributed to its use of 2 circuits. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. It is reported that there are 5 input lines. There is 2μA quiescent current consumption by it.
74VHC112MX Features
Tape & Reel (TR) package
74VHC series
16 pins
74VHC112MX Applications
There are a lot of ON Semiconductor 74VHC112MX Flip Flops applications.
- Power down protection
- Single Up Count-Control Line
- Common Clocks
- ESCC
- Digital electronics systems
- Latch
- Count Modes
- Dynamic threshold performance
- Load Control
- Computers
