74VHC138MTC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 173mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Subcategory | Decoder/Drivers |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74VHC138 |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 18.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 18.5 ns |
| Family | AHC/VHC |
| Logic Function | Decoder, Demultiplexer, Demux |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Number of Input Lines | 3 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC138MTC Overview
In order to conserve board space, digital switch is included in the 16-TSSOP (0.173, 4.40mm Width).In this case, it is packaged as Tube.As far as mounting is concerned, digital switch ic uses Surface Mount.the multiplexers uses IC Decoder/Demultiplexer as the analog IC.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 2V~5.5V supply voltage.Several applications are possible for 74VHC series multiplexers.There is a design for terminating 16 as part of its basic configuration.As its base part number is 74VHC138, logic switch can also be used to find its related parts.The multiplexer's system is supplied with a voltage of 3.3V.It employs GULL WING as the point at which conductors come to an end.Its supply type is Single, which is used as the source of power.It is configured with 16 pins.It is positioned in the direction of Surface Mount.The AHC/VHC family includes the logic switch.It is recommended that the minimum supply voltage (Vsup) be kept at 2V to avoid some unnecessary failures.Vsup (maximum supply voltage) should be kept as 5.5V to prevent unnecessary failures.It is provided that 2/5.5V has a power supply in order to function normally.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.Despite not interacting with external factors, it consumes 4μA current of multiplexer ic.The switches package is packaged in accordance with the RAIL method.The multiplexers have3 input lines on the board that accept voltage levels.A signal source has 8 output lines.
74VHC138MTC Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2/5.5V
3 input lines
8 output lines
74VHC138MTC Applications
There are a lot of ON Semiconductor 74VHC138MTC Signal Switches / Multiplexers / Decoders applications.
- Encrypted communications system
- RF-based home automation system
- Data communication
- Enabling block of memory depending on address in memory chips
- Control unit of Central Processing unit (CPU)
- Analog to digital conversion
- Medical industry
- Automatic health monitoring systems
- Signal router
- Idle motor
