74VHC157MTCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 173mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74VHC157 |
| Number of Outputs | 1 |
| Circuit | 4 x 2:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Throw Configuration | DPST |
| Propagation Delay | 8.4 ns |
| Family | AHC/VHC |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 8 |
| Current - Output High, Low | 8mA 8mA |
| Supply Type | Single |
| Output Polarity | TRUE |
| Prop. Delay@Nom-Sup | 9.5 ns |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC157MTCX Overview
Providing this information in the 16-TSSOP (0.173, 4.40mm Width) enables digital switch board space to be saved.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.the multiplexers uses IC Multiplexer as the analog IC.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Design engineers have more flexibility when digital controlled switch operates at 2V~5.5V voltage.The multiplexers can be used for a wide range of applications since they are members of 74VHC series.There are 16 terminations included in its basic configuration.There is a base part number 74VHC157 that can be used to locate signal switch's related components as well.The multiplexer's system works with 3.3V voltage.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, the supply type is Single.With 16 pins, it is configured.The mounting is in the way of Surface Mount.I would like to refer to the logic switch as a member of the AHC/VHC family.In this signal multiplexer, there are 4 bits provided.Keep Vsup at 2V to avoid unnecessary failures.Keeping Vsup at 5.5V will prevent some unnecessary failures.As a result, the turn signal switch consists of 1 outputs.This multiplexer is equipped with 8 inputs and 8 outputs.The signal switching is packaged by TAPE AND REEL. The multiplexers have 2 input lines used to accept voltage levels.
74VHC157MTCX Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
2 input lines
74VHC157MTCX Applications
There are a lot of ON Semiconductor 74VHC157MTCX Signal Switches / Multiplexers / Decoders applications.
- Electronic circuits
- To select different devices in microprocessor input
- Logic circuits
- Time division multiplexing system
- Code converters
- To select different task for memory in microprocessor memory systems
- Robotic vehicles
- Injectors
- Enabling block of memory depending on address in memory chips
- Solenoid cooling fan
