74VHC16373TTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74VHC16373 |
| Pin Count | 48 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 16 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 5 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 3 |
| Independent Circuits | 2 |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC16373TTR Overview
48-TFSOP (0.240, 6.10mm Width) contains it. A package of Tape & Reel (TR) has been used. In this configuration, the output is set to Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. There is no supply voltage for this device. There is a temperature of -55°C~125°C at which the system operates. It is a type of FPGA belonging to the 74VHC series. The electronic part in this image has 16 bits. In this device, there are 48 terminations that have been designed. It is a member of the 74VHC16373 family. In order to function, the supply voltage should be set to 3.3V. It is equipped with 48 pin count. AHC/VHC is the family of this electronic device. With the design of the board, there are only 48 pins. Surface Mount is used to mount this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This part is included in FF/Latches. The maximal supply voltage (Vsup) reaches 5.5V. It is recommended to have a higher supply voltage (Vsup) than 2V. Electronic circuits are represented by 3 input lines. Its reliable performance makes it an excellent choice for TAPE AND REEL. It achieves superior flexibility by using 8 circuits.
74VHC16373TTR Features
48-TFSOP (0.240, 6.10mm Width) package
74VHC series
16 Bits
74VHC16373 family
48 pin count
48 pins
74VHC16373TTR Applications
There are a lot of STMicroelectronics 74VHC16373TTR Latches applications.
- Pattern generators
- Hammer Device Information
- Up/down difference counting
- Parallel-to-Serial Data Conversion
- Network Switches
- Programmable binary
- Buffer register
- Frequency
- Accumulator Registers
- Parallel Input
