74VHC175MTC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 11 hours ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 173mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74VHC175 |
| Function | Master Reset |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Clock Frequency | 115MHz |
| Propagation Delay | 15 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 4.9 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC175MTC Overview
The flip flop is packaged in a case of 16-TSSOP (0.173, 4.40mm Width). D flip flop is included in the Tubepackage. In the configuration, Differentialis used as the output. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The supply voltage is set to 2V~5.5V. A temperature of -40°C~85°C TAis considered to be the operating temperature. It is an electronic flip flop with the type D-Type. In this case, it is a type of FPGA belonging to the 74VHC series. A frequency of 115MHzshould not be exceeded by its output. A total of 1 elements are present. It has been determined that there have been 16 terminations. If you search by 74VHC175, you will find similar parts. A voltage of 3.3V provides power to the D latch. The input capacitance of this JK flip flopis 4pF farads. It is a member of the AHC/VHCfamily of D flip flop. There is an electronic part that is mounted in the way of Surface Mount. The 16pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. The part is included in FF/Latches. An electronic part designed with 4bits is used in this application. Vsup reaches 5.5V, the maximal supply voltage. The supply voltage (Vsup) should be maintained above 2V for normal operation. Considering the reliability of this T flip flop, it is well suited for RAIL. The D latch operates on 2/5.5V volts. As a result, it consumes 4μA of quiescent current without being affected by external factors. A total of 4 channels are available.
74VHC175MTC Features
Tube package
74VHC series
16 pins
4 Bits
2/5.5V power supplies
74VHC175MTC Applications
There are a lot of ON Semiconductor 74VHC175MTC Flip Flops applications.
- Memory
- Reduced system switching noise
- ESD protection
- Buffer registers
- Matched Rise and Fall
- Consumer
- QML qualified product
- Storage Registers
- Storage registers
- Instrumentation
