74VHC175MTCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 12 hours ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 173mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74VHC175 |
| Function | Master Reset |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Number of Bits | 4 |
| Clock Frequency | 115MHz |
| Propagation Delay | 9.3 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 4.9 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC175MTCX Overview
16-TSSOP (0.173, 4.40mm Width)is the packaging method. It is included in the package Tape & Reel (TR). T flip flop uses Differentialas its output configuration. It is configured with a trigger that uses Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 2V~5.5V volts. The operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. FPGAs belonging to the 74VHCseries contain this type of chip. You should not exceed 115MHzin the output frequency of the device. There are 1 elements in it. A total of 16 terminations have been made. Members of the 74VHC175family make up this object. Power is provided by a 3.3V supply. This T flip flop has a capacitance of 4pF farads at the input. In this case, the D flip flop belongs to the AHC/VHCfamily. There is an electronic part that is mounted in the way of Surface Mount. 16pins are included in its design. This device's clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. An electronic part designed with 4bits is used in this application. 5.5Vis the maximum supply voltage (Vsup). Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. It operates from 2/5.5V power supplies. Its output current of 8mAallows for maximum design flexibility. In terms of quiescent current, it consumes 4μA . It is of 4 channels.
74VHC175MTCX Features
Tape & Reel (TR) package
74VHC series
16 pins
4 Bits
2/5.5V power supplies
74VHC175MTCX Applications
There are a lot of ON Semiconductor 74VHC175MTCX Flip Flops applications.
- Latch-up performance
- Dynamic threshold performance
- Data transfer
- Shift Registers
- ESCC
- Parallel data storage
- Frequency Divider circuits
- Modulo – n – counter
- Common Clocks
- Data Synchronizers
