74VHC175MX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 12 hours ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 143mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | 74VHC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74VHC175 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Clock Frequency | 115MHz |
| Propagation Delay | 9.3 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 4.9 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 1.45mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC175MX Overview
The flip flop is packaged in 16-SOIC (0.154, 3.90mm Width). The package Tape & Reel (TR)contains it. It is configured with Differentialas an output. The trigger configured with it uses Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 2V~5.5Vis used as the supply voltage. A temperature of -40°C~85°C TAis considered to be the operating temperature. The type of this D latch is D-Type. In this case, it is a type of FPGA belonging to the 74VHC series. This D flip flop should not have a frequency greater than 115MHz. A total of 1elements are present in it. 16terminations have occurred. If you search by 74VHC175, you will find similar parts. The power supply voltage is 3.3V. This T flip flop has a capacitance of 4pF farads at the input. Electronic devices of this type belong to the AHC/VHCfamily. Electronic part Surface Mountis mounted in the way. This board is designed with 16pins on it. This device's clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. This flip flop is designed with 4 Bits. In this case, the maximum supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be above 2V. In order to achieve its superior flexibility, 4 circuits are used. As a result of its reliability, this D flip flop is ideally suited for TR. In order for the device to operate, it requires 2/5.5V power supplies. It is designed with 8 output lines. 4μAquiescent current consumed.
74VHC175MX Features
Tape & Reel (TR) package
74VHC series
16 pins
4 Bits
2/5.5V power supplies
74VHC175MX Applications
There are a lot of ON Semiconductor 74VHC175MX Flip Flops applications.
- Matched Rise and Fall
- Circuit Design
- Memory
- Load Control
- Pattern generators
- Storage registers
- Patented noise
- Divide a clock signal by 2 or 4
- Communications
- Reduced system switching noise
