74VHC175SJX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 242mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | 74VHC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74VHC175 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Clock Frequency | 115MHz |
| Propagation Delay | 9.3 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 4.9 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC175SJX Overview
It is embeded in 16-SOIC (0.209, 5.30mm Width) case. The package Tape & Reel (TR)contains it. T flip flop uses Differentialas its output configuration. In the configuration of the trigger, Positive Edgeis used. There is an electrical part that is mounted in the way of Surface Mount. With a supply voltage of 2V~5.5V volts, it operates. It is at -40°C~85°C TAdegrees Celsius that the system is operating. It belongs to the type D-Typeof flip flops. In FPGA terms, D flip flop is a type of 74VHCseries FPGA. A frequency of 115MHzshould not be exceeded by its output. There are 1 elements in it. The number of terminations is 16. Members of the 74VHC175family make up this object. A voltage of 3.3V is used to power it. Its input capacitance is 4pF farads. AHC/VHCis the family of this D flip flop. There is an electronic part that is mounted in the way of Surface Mount. This board has 16 pins. The clock edge trigger type for this device is Positive Edge. It is included in FF/Latches. 4bits are used in its design. 5.5Vis the maximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be kept above 2V. To achieve this superior flexibility, 4 circuits are used. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. The D latch runs on a voltage of 2/5.5V volts. It is designed with 8 output lines. There is 4μA quiescent current consumption by it.
74VHC175SJX Features
Tape & Reel (TR) package
74VHC series
16 pins
4 Bits
2/5.5V power supplies
74VHC175SJX Applications
There are a lot of ON Semiconductor 74VHC175SJX Flip Flops applications.
- High Performance Logic for test systems
- Buffer registers
- Data transfer
- Bus hold
- Memory
- QML qualified product
- Latch-up performance
- Counters
- Frequency Divider circuits
- ESD protection
