74VHC273M
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 801mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | 74VHC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Base Part Number | 74VHC273 |
| Function | Master Reset |
| Number of Outputs | 10 |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 110MHz |
| Propagation Delay | 19.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 5.8 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height Seated (Max) | 2.642mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
74VHC273M Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). The Tubepackage contains it. Non-Invertedis the output configured for it. Positive Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. It operates with a supply voltage of 2V~5.5V. -40°C~85°C TAis the operating temperature. A flip flop of this type is classified as a D-Type. In terms of FPGAs, it belongs to the 74VHC series. A frequency of 110MHzshould be the maximum output frequency. The element count is 1 . There are 20 terminations,D latch belongs to the 74VHC273 family. It is powered from a supply voltage of 3.3V. Input capacitance of this device is 4pF farads. In terms of electronic devices, this device belongs to the AHC/VHCfamily of devices. Surface Mount mounts this electronic component. It is designed with 20 pins. There is a clock edge trigger type of Positive Edgeon this device. It is part of the FF/Latchesbase part number family. An electronic part designed with 8bits is used in this application. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. As a result of its reliable performance, this T flip flop is suitable for RAIL. There are 2/5.5V power supplies attached to it. As a result, it consumes 4μA of quiescent current without being affected by external factors. 8is the number of channels.
74VHC273M Features
Tube package
74VHC series
20 pins
8 Bits
2/5.5V power supplies
74VHC273M Applications
There are a lot of ON Semiconductor 74VHC273M Flip Flops applications.
- Control circuits
- Latch
- ATE
- Shift registers
- Computing
- Safety Clamp
- Modulo – n – counter
- Instrumentation
- Single Up Count-Control Line
- Shift Registers
