74VHC273MTC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 191mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74VHC273 |
| Function | Master Reset |
| Number of Outputs | 10 |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 110MHz |
| Propagation Delay | 17.1 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 5.8 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 900μm |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC273MTC Overview
In the form of 20-TSSOP (0.173, 4.40mm Width), it has been packaged. D flip flop is embedded in the Tube package. T flip flop uses Non-Invertedas its output configuration. This trigger uses the value Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 2V~5.5Vvolts. It is at -40°C~85°C TAdegrees Celsius that the system is operating. It belongs to the type D-Typeof flip flops. The 74VHCseries comprises this type of FPGA. It should not exceed 110MHzin terms of its output frequency. D latch consists of 1 elements. It has been determined that there have been 20 terminations. JK flip flop belongs to 74VHC273 family. It is powered from a supply voltage of 3.3V. JK flip flop input capacitance is 4pF farads. AHC/VHCis the family of this D flip flop. Surface Mount mounts this electronic component. Basically, it is designed with a set of 20 pins. This device's clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. It is designed with a number of bits of 8. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. Compared to other similar T flip flops, this device offers reliable performance and is well suited for RAIL. A power supply of 2/5.5Vis required to operate it. There is a consumption of 4μAof quiescent current from it. A total of 8 channels are available.
74VHC273MTC Features
Tube package
74VHC series
20 pins
8 Bits
2/5.5V power supplies
74VHC273MTC Applications
There are a lot of ON Semiconductor 74VHC273MTC Flip Flops applications.
- Shift registers
- Memory
- Dynamic threshold performance
- ESCC
- Shift Registers
- ESD protection
- Pattern generators
- Circuit Design
- Supports Live Insertion
- Reduced system switching noise
