74VHC273MTCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 191mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74VHC273 |
| Function | Master Reset |
| Number of Outputs | 10 |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Number of Bits | 8 |
| Clock Frequency | 110MHz |
| Propagation Delay | 19.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 5.8 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC273MTCX Overview
The package is in the form of 20-TSSOP (0.173, 4.40mm Width). There is an embedded version in the package Tape & Reel (TR). T flip flop is configured with an output of Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountmounts this electrical part. Powered by a 2V~5.5Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis used in the operation. This logic flip flop is classified as type D-Type. The 74VHCseries comprises this type of FPGA. You should not exceed 110MHzin its output frequency. A total of 1 elements are present. It has been determined that there have been 20 terminations. If you search by 74VHC273, you will find similar parts. Power is provided by a 3.3V supply. Input capacitance of this device is 4pF farads. It belongs to the family of electronic devices known as AHC/VHC. There is an electronic part that is mounted in the way of Surface Mount. This board has 20 pins. It has a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. The design is based on 8bits. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. It runs on 2/5.5Vvolts of power. The output current of 8mA makes it feature maximum design flexibility. As a result, it consumes 4μA of quiescent current without being affected by external factors. 8 channels are available.
74VHC273MTCX Features
Tape & Reel (TR) package
74VHC series
20 pins
8 Bits
2/5.5V power supplies
74VHC273MTCX Applications
There are a lot of ON Semiconductor 74VHC273MTCX Flip Flops applications.
- Set-reset capability
- Computing
- Synchronous counter
- Registers
- Reduced system switching noise
- Frequency division
- Frequency Divider circuits
- Power down protection
- Buffered Clock
- Parallel data storage
