74VHC273SJX
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 481.5mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74VHC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74VHC273 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Clock Frequency | 110MHz |
| Propagation Delay | 11 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 5.8 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 10 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC273SJX Overview
20-SOIC (0.209, 5.30mm Width)is the packaging method. The Tape & Reel (TR)package contains it. T flip flop uses Non-Invertedas its output configuration. This trigger uses the value Positive Edge. There is an electric part mounted in the way of Surface Mount. It operates with a supply voltage of 2V~5.5V. In the operating environment, the temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. In terms of FPGAs, it belongs to the 74VHC series. It should not exceed 110MHzin its output frequency. A total of 1 elements are present. There have been 20 terminations. You can search similar parts based on 74VHC273. It is powered from a supply voltage of 3.3V. A JK flip flop with a 4pFfarad input capacitance is used here. Devices in the AHC/VHCfamily are electronic devices. There is an electronic component mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. This device exhibits a clock edge trigger type of Positive Edge. The part you are looking for is included in FF/Latches. There are 8bits in this flip flop. As soon as 5.5Vis reached, Vsup reaches its maximum value. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. Using 8 circuits, it is highly flexible. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. An electrical current of 2/5.5V volts is applied to it. Currently, there are 10 input lines present. It consumes 4μA current.
74VHC273SJX Features
Tape & Reel (TR) package
74VHC series
20 pins
8 Bits
2/5.5V power supplies
74VHC273SJX Applications
There are a lot of ON Semiconductor 74VHC273SJX Flip Flops applications.
- Bus hold
- Power down protection
- EMI reduction circuitry
- Parallel data storage
- Data storage
- ESD performance
- Common Clocks
- Counters
- Control circuits
- ATE
