74VHC373MTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74VHC373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 9.2 ns |
| Turn On Delay Time | 5 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC373MTR Overview
Package 20-SOIC (0.295, 7.50mm Width) includes it. It is packaged in the way of Tape & Reel (TR). In this configuration, the output is set to Tri-State. This electrical device has the logic type D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. A voltage of 2V~5.5V is used as the supply voltage for this device. A temperature of -55°C~125°C is set as the operating temperature. The 74VHC series of FPGAs is the one this FPGA belongs to. The design of this electronic part contains 8 bits. This device has been designed with 20 terminations available. It is a member of the 74VHC373 family. The device works with a voltage of 3.3V for its supply voltage. With 20 pins, it is equipped. It is part of the family of electronic devices called AHC/VHC. Designed with 20 pins, it is compatible with a wide range of devices. Surface Mount is used to mount this electronic part. This device has 2 ports that can be connected to it. In the subcategory FF/Latches, this part belongs. 5.5V is the maximum voltage (Vsup) that can be supplied. There are 2/5.5V power supplies attached to it. A supply voltage (Vsup) greater than 2V is required. It contains 8 input lines where electronic circuits are present. The reliability of this device makes it well suited to TAPE AND REEL. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code.
74VHC373MTR Features
20-SOIC (0.295, 7.50mm Width) package
74VHC series
8 Bits
74VHC373 family
20 pin count
20 pins
2/5.5V power supplies
74VHC373MTR Applications
There are a lot of STMicroelectronics 74VHC373MTR Latches applications.
- Counter
- Address register
- Shift left register
- Clocks
- Buffer Storage
- Parallel Input
- Serial Input
- BCD counting
- Buffer register
- Up-Down Johnson
