74VHC374MTC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 191mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74VHC374 |
| Function | Standard |
| Number of Outputs | 10 |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 2.5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 120MHz |
| Propagation Delay | 16.2 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 5.4 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 900μm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
74VHC374MTC Overview
As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). The package Tubecontains it. In the configuration, Tri-State, Non-Invertedis used as the output. The trigger it is configured with uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. With a supply voltage of 2V~5.5V volts, it operates. It is operating at -40°C~85°C TA. D-Typeis the type of this D latch. It belongs to the 74VHCseries of FPGAs. A frequency of 120MHzshould be the maximum output frequency. In total, there are 1 elements. It has been determined that there have been 20 terminations. You can search similar parts based on 74VHC374. A voltage of 3.3V provides power to the D latch. Input capacitance of this device is 4pF farads. A device of this type belongs to the family of AHC/VHC. There is an electronic part that is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. In this device, the clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. This flip flop is designed with 8 Bits. Vsup reaches 5.5V, the maximal supply voltage. The supply voltage (Vsup) should be kept above 2V for normal operation. Compared to other similar T flip flops, this device offers reliable performance and is well suited for RAIL. In order for the device to operate, it requires 2/5.5V power supplies. A total of 2ports are embedded in the D flip flop. If high efficiency is to be achieved, the supply voltage should be maintained at 2.5V. It has 8 output lines to operate. In terms of quiescent current, it consumes 4μA . A total of 4 channels are available.
74VHC374MTC Features
Tube package
74VHC series
20 pins
8 Bits
2/5.5V power supplies
74VHC374MTC Applications
There are a lot of ON Semiconductor 74VHC374MTC Flip Flops applications.
- Cold spare funcion
- Balanced Propagation Delays
- Parallel data storage
- Asynchronous counter
- Event Detectors
- Computing
- Set-reset capability
- Latch
- Supports Live Insertion
- Synchronous counter
