74VHC374MTCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 191mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74VHC374 |
| Function | Standard |
| Number of Outputs | 10 |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 120MHz |
| Propagation Delay | 16.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 5.4 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC374MTCX Overview
The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. D flip flop is included in the Tape & Reel (TR)package. Tri-State, Non-Invertedis the output configured for it. This trigger uses the value Positive Edge. Surface Mountis in the way of this electric part. A 2V~5.5Vsupply voltage is required for it to operate. In the operating environment, the temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 74VHCseries of FPGAs. There should be no greater frequency than 120MHzon its output. The element count is 1 . Currently, there are 20 terminations. This D latch belongs to the family of 74VHC374. An input voltage of 3.3Vpowers the D latch. This T flip flop has a capacitance of 4pF farads at the input. An electronic device belonging to the family AHC/VHCcan be found here. Electronic part Surface Mountis mounted in the way. The 20pins are designed into the board. The clock edge trigger type for this device is Positive Edge. The part is included in FF/Latches. The design is based on 8bits. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. There are 2/5.5V power supplies attached to it. A D flip flop with 2embedded ports is available. Despite external influences, it consumes 4μAof quiescent current. 8 channels are available.
74VHC374MTCX Features
Tape & Reel (TR) package
74VHC series
20 pins
8 Bits
2/5.5V power supplies
74VHC374MTCX Applications
There are a lot of ON Semiconductor 74VHC374MTCX Flip Flops applications.
- Digital electronics systems
- Buffer registers
- Computing
- Data transfer
- Synchronous counter
- Divide a clock signal by 2 or 4
- Test & Measurement
- Pattern generators
- Buffered Clock
- Bus hold
