74VHC374MTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74VHC374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 270MHz |
| Propagation Delay | 16.2 ns |
| Turn On Delay Time | 6.9 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC374MTR Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. D flip flop is embedded in the Tape & Reel (TR) package. This output is configured with Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Surface Mount. Powered by a 2V~5.5Vvolt supply, it operates as follows. The operating temperature is -55°C~125°C TA. Logic flip flops of this type are classified as D-Type. In this case, it is a type of FPGA belonging to the 74VHC series. This D flip flop should not have a frequency greater than 270MHz. A total of 1 elements are present. T flip flop consumes 4μA quiescent energy. Terminations are 20. This D latch belongs to the family of 74VHC374. It is powered from a supply voltage of 3.3V. This T flip flop has a capacitance of 7pF farads at the input. This D flip flop belongs to the family of AHC/VHC. There is an electronic part mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device exhibits a clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. 8bits are used in its design. In this case, the maximum supply voltage (Vsup) reaches 5.5V. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. Its superior flexibility is attributed to its use of 8 circuits. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. There are 2/5.5V power supplies attached to it. There are 2 ports embedded in the flip flops. There are 3 output lines on it.
74VHC374MTR Features
Tape & Reel (TR) package
74VHC series
20 pins
8 Bits
2/5.5V power supplies
74VHC374MTR Applications
There are a lot of STMicroelectronics 74VHC374MTR Flip Flops applications.
- Clock pulse
- Reduced system switching noise
- CMOS Process
- Single Down Count-Control Line
- Data storage
- Control circuits
- Frequency Divider circuits
- ATE
- Safety Clamp
- Synchronous counter
