74VHC374N
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74VHC |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NOT SPECIFIED |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 120MHz |
| Family | AHC/VHC |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Length | 26.075mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74VHC374N Overview
As a result, it is packaged as 20-DIP (0.300, 7.62mm). Package Tubeembeds it. T flip flop uses Tri-State, Non-Invertedas the output. The trigger it is configured with uses Positive Edge. It is mounted in the way of Through Hole. A 2V~5.5Vsupply voltage is required for it to operate. Temperature is set to -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 74VHCseries of FPGAs. A frequency of 120MHzshould not be exceeded by its output. A total of 1elements are contained within it. Despite external influences, it consumes 4μAof quiescent current. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is powered by a voltage of 3.3V . Its input capacitance is 4pF farads. This D flip flop belongs to the family of AHC/VHC. There is a 5.5Vmaximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be above 2V. A D flip flop with 2embedded ports is available.
74VHC374N Features
Tube package
74VHC series
74VHC374N Applications
There are a lot of Rochester Electronics, LLC 74VHC374N Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Dynamic threshold performance
- Differential Individual
- Supports Live Insertion
- Shift Registers
- ESCC
- Automotive
- Bus hold
- ATE
- Individual Asynchronous Resets
