74VHC4051N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Supplier Device Package | 16-PDIP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 100Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 600mW |
| Base Part Number | 74VHC4051 |
| Number of Outputs | 1 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Power Dissipation | 600mW |
| Propagation Delay | 35 ns |
| Turn On Delay Time | 200 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±1V~6V |
| Supply Type | Dual, Single |
| Bandwidth | 30MHz |
| Turn-Off Delay Time | 170 ns |
| Max Dual Supply Voltage | 6V |
| Number of Gates | 1 |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 1V |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 200nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 90pF |
| Switch Time (Ton, Toff) (Max) | 41ns, 32ns |
| Channel-to-Channel Matching (ΔRon) | 10Ohm |
| Crosstalk | -50dB @ 1MHz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74VHC4051N Overview
As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tube. Through Hole is where this multiplexer is located. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around -40°C~85°C TA. As a result of its 8 channels, this electronic component provides high-quality output. A total of 1 circuits make up this switch device. If you are looking for variants of the digital switch, trying search with 74VHC4051. As far as internal resistance is concerned, it has 100Ohm. For details about the functions of 16 pins, please refer to the datasheets. In normalcircumstances, users should not exceed 6V volts for the multiplexer. A cost-effective Dual, Single supply type analogue multiplexer. 2V is the lowest voltage the electrical component should receive. For this multiplexer, dual supply voltage is feasible, but it should not exceed 6V. With dual power supplies, you should attach at least 1V. The electrical component supports 8 inputs. There are 30MHz bandwidths for data transfer. The switches should not operate in an environment where the temperature is higher than 85°C. Multiplexer ics with 1 outputs are available. Suppliers offer a package with 16-PDIP.
74VHC4051N Features
8 Channels
Bandwidth: 30MHz
74VHC4051N Applications
There are a lot of ON Semiconductor 74VHC4051N Analog Switches & Multiplexers ICs applications.
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Digital access cross connects
- Automatic test equipment
- SONET/SDH ADM
- Switching Systems
- Industrial control systems
- MP3 players
- Imaging
- Cable PC
- HDTV
