74VHC4052N
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Supplier Device Package | 16-PDIP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 100Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 600mW |
| Base Part Number | 74VHC4052 |
| Number of Outputs | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Power Dissipation | 600mW |
| Throw Configuration | SP4T |
| Propagation Delay | 35 ns |
| Turn On Delay Time | 200 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 8 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±1V~6V |
| Supply Type | Dual, Single |
| Bandwidth | 30MHz |
| Turn-Off Delay Time | 170 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 45pF |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 41ns, 32ns |
| Channel-to-Channel Matching (ΔRon) | 10Ohm |
| Crosstalk | -50dB @ 1MHz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74VHC4052N Overview
Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tube. In Through Hole, you'll find this switch device. 4:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -40°C~85°C TA. A 2 channel electronic part produces high-quality output. On the other hand, analog switches can be constructed using SP4T switching circuits. Circuits number 2 make up this analogue multiplexer. Try searching for the analog switch ic with 74VHC4052 if you are looking for variants. It has an internal resistance of 100Ohm. Datasheets for 16 pin functions are available upon request. In normalcircumstances, users should not exceed 6V volts for the multiplexer. The digital multiplexer has a low cost Dual, Single supply. There should be 2V voltage fed to the electrical part below 2V. Despite this switch's dual supply capability, its voltage should not exceed 6V. If you are using dual power supplies, you should attach at least 1V. There are 8 inputs to be operated. It is possible to transfer data over a 30MHz-bandwidth. Temperatures above 85°C should not be used to operate the switches. The analog switch ics includes 2 outputs. There is a 16-PDIP package available from suppliers.
74VHC4052N Features
2 Channels
Switch Circuit: SP4T
Bandwidth: 30MHz
74VHC4052N Applications
There are a lot of ON Semiconductor 74VHC4052N Analog Switches & Multiplexers ICs applications.
- Audio and video signal routing
- Video switching
- Avionics test equipment
- Routers
- Avionics and Military Systems
- DSLAMs
- Sample-and-hold systems
- 65 V DACs
- Remote Powered Equipment
- Medical systems
