74VHC4053MTC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 100Ohm |
| Max Power Dissipation | 600mW |
| Base Part Number | 74VHC4053 |
| Number of Circuits | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Power Dissipation | 600mW |
| Propagation Delay | 35 ns |
| Turn On Delay Time | 200 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±1V~6V |
| Supply Type | Dual, Single |
| Bandwidth | 30MHz |
| Turn-Off Delay Time | 170 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 50nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 30pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 41ns, 32ns |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -50dB @ 1MHz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74VHC4053MTC Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tube. There is an analog multiplexer mounted in position Surface Mount. 2:1 is the number of circuits in the multiplexer and demultiplexer. Temperatures around -40°C~85°C TA are extended for operation. SPDT switching circuits are used in these analog switch ics. Circuits number 3 make up this analogue multiplexer. Try searching with 74VHC4053 to find analog multiplexer variants. It has an internal resistance of 100Ohm. Datasheets for 16 pin functions are available upon request. In a normalsituation, users should not supply the switches with voltage higher than 6V. Dual, Single supply type digital switch with a low cost. It is recommended to use 2V as the lowest voltage for the electrical part. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 6V. The voltage should be at least 1V if you are using dual power supplies. Among the inputs that can be operated are the 6 inputs. In 30MHz-bandwidths, data can be transferred.
74VHC4053MTC Features
Switch Circuit: SPDT
Bandwidth: 30MHz
74VHC4053MTC Applications
There are a lot of ON Semiconductor 74VHC4053MTC Analog Switches & Multiplexers ICs applications.
- Digital Cross-Connects
- Modems
- Avionics and Military Systems
- Audio signal routing
- SONET
- Communication systems
- Switching Systems
- Signal routing between systems
- Imaging
- Audio/video switches
