74VHC4053MTCX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 100Ohm |
| Max Power Dissipation | 600mW |
| Base Part Number | 74VHC4053 |
| Number of Circuits | 3 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Power Dissipation | 600mW |
| Propagation Delay | 35 ns |
| Turn On Delay Time | 200 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Number of Inputs | 6 |
| Voltage - Supply, Single/Dual (±) | 2V~6V ±1V~6V |
| Supply Type | Dual, Single |
| Bandwidth | 30MHz |
| Turn-Off Delay Time | 170 ns |
| Max Dual Supply Voltage | 6V |
| On-State Resistance (Max) | 100Ohm |
| Min Dual Supply Voltage | 1V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 50nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 30pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 41ns, 32ns |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Crosstalk | -50dB @ 1MHz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74VHC4053MTCX Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Operating temperature extended to -40°C~85°C TA. A SPDT switching circuit is used to build these analog multiplexers. Circuits number 3 make up this analogue multiplexer. Try searching with 74VHC4053 to find analog multiplexer variants. The internal resistance of this digital multiplexer is 100Ohm. Please refer to the datasheets for 16 pins functions. In normalcircumstances, users should not exceed 6V volts for the multiplexer. An effective Dual, Single supply digital multiplexer. The lowest voltage fed to the electronic component should be 2V. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. A dual power supply should have at least 1V voltage attached. Among the inputs that can be operated are the 6 inputs. There are 30MHz bandwidths for data transfer.
74VHC4053MTCX Features
Switch Circuit: SPDT
Bandwidth: 30MHz
74VHC4053MTCX Applications
There are a lot of ON Semiconductor 74VHC4053MTCX Analog Switches & Multiplexers ICs applications.
- E1 Network Equipment
- Mechanical reed relay replacement
- CSU
- Cable Modem
- Sample-and-hold systems
- Precision instrumentation
- ATM
- High reliability control systems
- Public switching systems
- Modems
