74VHC573MTC
| Parameters | |
|---|---|
| Number of Output Lines | 3 |
| Height | 1.1mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 191mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74VHC573 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 8mA |
| Number of Bits | 8 |
| Propagation Delay | 17.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 4.5 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 2 |
| Independent Circuits | 1 |
74VHC573MTC Overview
The package in which it is embedded is named 20-TSSOP (0.173, 4.40mm Width). A package of Tube has been used. It uses Tri-State as the output. The Logic type of this electrical device is D-Type Transparent Latch. Surface Mount is used to mount this electronic part. The supply voltage of the device is 2V~5.5V. A temperature of -40°C~85°C is used for operation. It is a type of FPGA belonging to the 74VHC series. An electronic part with 8 bits is designed. A device with this design has 20 terminations. It is a member of the 74VHC573 family. The device works with a voltage of 3.3V for its supply voltage. It is a member of the AHC/VHC family of electronic devices. The device has 20 pins. It is mounted according to the Surface Mount method. 2 ports are available on this device. This part can be found within the FF/Latches subcategory. The maximal supply voltage (Vsup) reaches 5.5V. In order to operate properly, the supply voltage (Vsup) should be greater than 2V. In the circuit, there are 2 input lines that are constituted by an electronic circuit. Based on its reliable performance, this device is well suited to RAIL. The 8mA output current gives it maximum design flexibility. It follows that 3 output lines are generated from the binary equivalent of the input line. The quiescent current consumed by it is 4μA because it is unaffected by external factors.
74VHC573MTC Features
20-TSSOP (0.173, 4.40mm Width) package
74VHC series
8 Bits
74VHC573 family
20 pins
74VHC573MTC Applications
There are a lot of ON Semiconductor 74VHC573MTC Latches applications.
- Counter
- Hammer
- Automotive ADAS
- Counters
- Timers
- Shift register
- Up/down difference counting
- Multi-line decoders
- Buffer/Storage Registers
- Parallel Input
