74VHC573MTCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 191mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74VHC573 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Max Supply Current | 4μA |
| Number of Bits | 8 |
| Propagation Delay | 17.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 4.5 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Height | 900μm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC573MTCX Overview
The package in which it is embedded is named 20-TSSOP (0.173, 4.40mm Width). A Tape & Reel (TR) package is used to package it. Tri-State is used for the output it is configured with. In this electrical device, the logic type is D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. A voltage of 2V~5.5V is used as the supply voltage for this device. A temperature of -40°C~85°C is set as the operating temperature. The 74VHC series of FPGAs is the one this FPGA belongs to. There are 8 bits in this electronic part. This device is designed with 20 terminations. The family it belongs to is 74VHC573. It operates with a supply voltage of 3.3V. It is a member of the AHC/VHC family of electronic devices. There are 20 pins on it. Surface Mount is used to mount this electronic part. This device has 2 ports. The part is in the FF/Latches subcategory. When Vsup reaches 5.5V, the maximal supply voltage is reached. The supply voltage (Vsup) should be greater than 2V. As a result of its reliable performance, it is well suited for TAPE AND REEL. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. As far as external factors are concerned, it consumes 4μA of quiescent current without getting affected by them. The superior flexibility of the system is achieved through its use of 8 circuits.
74VHC573MTCX Features
20-TSSOP (0.173, 4.40mm Width) package
74VHC series
8 Bits
74VHC573 family
20 pins
74VHC573MTCX Applications
There are a lot of ON Semiconductor 74VHC573MTCX Latches applications.
- Buffer Storage
- Relay
- Stacked or Push-Down Registers
- PCs and Notebooks
- Clocks
- Shift register
- Frequency dividing
- Four-bit storage with output enable
- Storage
- Serial Output Register
