74VHC574MX
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Base Part Number | 74VHC574 |
| Function | Standard |
| Number of Outputs | 10 |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 115MHz |
| Propagation Delay | 19 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 5.6 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 801mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74VHC |
74VHC574MX Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). It is included in the package Tape & Reel (TR). The output it is configured with uses Tri-State, Non-Inverted. This trigger uses the value Positive Edge. Surface Mountis occupied by this electronic component. The supply voltage is set to 2V~5.5V. In this case, the operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. JK flip flop is a part of the 74VHCseries of FPGAs. A frequency of 115MHzshould not be exceeded by its output. The element count is 1 . It has been determined that there have been 20 terminations. Members of the 74VHC574family make up this object. The power source is powered by 3.3V. There is 4pF input capacitance for this T flip flop. Electronic devices of this type belong to the AHC/VHCfamily. This electronic part is mounted in the way of Surface Mount. The 20pins are designed into the board. A Positive Edgeclock edge trigger is used in this device. This device has the base part number FF/Latches. There are 8bits in this flip flop. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. As a result of its reliable performance, this T flip flop is suitable for TR. The D flip flop has no ports embedded. There are 2 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. Despite external influences, it consumes 4μAof quiescent current. 8 channels are available.
74VHC574MX Features
Tape & Reel (TR) package
74VHC series
20 pins
8 Bits
74VHC574MX Applications
There are a lot of ON Semiconductor 74VHC574MX Flip Flops applications.
- Shift registers
- Test & Measurement
- Computers
- Digital electronics systems
- Automotive
- Guaranteed simultaneous switching noise level
- EMI reduction circuitry
- Load Control
- Count Modes
- Registers
