74VHC574TTR
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 115MHz |
| Propagation Delay | 16.7 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 7.1 ns |
| Family | AHC/VHC |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.6ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 7pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC574TTR Overview
20-TSSOP (0.173, 4.40mm Width)is the packaging method. D flip flop is embedded in the Tape & Reel (TR) package. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis positioned in the way of this electronic part. Powered by a 2V~5.5Vvolt supply, it operates as follows. A temperature of -55°C~125°C TAis used in the operation. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74VHC series. In order for it to function properly, its output frequency should not exceed 115MHz. There are 1 elements in it. A total of 20terminations have been recorded. Members of the 74VHC574family make up this object. Power is supplied from a voltage of 3.3V volts. Its input capacitance is 7pFfarads. A device of this type belongs to the family of AHC/VHC. A part of the electronic system is mounted in the way of Surface Mount. A total of 20pins are provided on this board. A Positive Edgeclock edge trigger is used in this device. There is a FF/Latchesbase part number assigned to the RS flip flops. An electronic part with 8bits has been designed. Vsup reaches its maximum value at 5.5V. Normally, the supply voltage (Vsup) should be above 2V. 8 circuits are used to achieve its superior flexibility. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. The system runs on a power supply of 2/5.5V watts. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It operates with 3 output lines. This D latch consumes 4μA quiescent current at all.
74VHC574TTR Features
Tape & Reel (TR) package
74VHC series
20 pins
8 Bits
2/5.5V power supplies
74VHC574TTR Applications
There are a lot of STMicroelectronics 74VHC574TTR Flip Flops applications.
- Data Synchronizers
- ATE
- Storage Registers
- Frequency Divider circuits
- Single Up Count-Control Line
- Data transfer
- Latch
- Power down protection
- QML qualified product
- Counters
