74VHC74M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 150mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1999 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Base Part Number | 74VHC74 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 8mA |
| Clock Frequency | 115MHz |
| Propagation Delay | 18 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 4.6 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC74M Overview
It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). There is an embedded version in the package Tube. In the configuration, Differentialis used as the output. There is a trigger configured with Positive Edge. There is an electronic component mounted in the way of Surface Mount. It operates with a supply voltage of 2V~5.5V. A temperature of -40°C~85°C TAis considered to be the operating temperature. The type of this D latch is D-Type. In this case, it is a type of FPGA belonging to the 74VHC series. It should not exceed 115MHzin its output frequency. A total of 14 terminations have been made. It is a member of the 74VHC74 family. The power source is powered by 3.3V. This T flip flop has a capacitance of 4pF farads at the input. It is a member of the AHC/VHC/H/U/Vfamily of D flip flop. Electronic part Surface Mountis mounted in the way. This board has 14 pins. This device has the clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. Vsup reaches 5.5V, the maximal supply voltage. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. As a result of its reliability, this D flip flop is ideally suited for RAIL. In addition to its maximum design flexibility, the output current of the T flip flop is 8mA. There is 2μA quiescent current consumption by it. 2 channels are available.
74VHC74M Features
Tube package
74VHC series
14 pins
74VHC74M Applications
There are a lot of ON Semiconductor 74VHC74M Flip Flops applications.
- Single Up Count-Control Line
- Divide a clock signal by 2 or 4
- Safety Clamp
- Asynchronous counter
- Registers
- Single Down Count-Control Line
- ESCC
- Shift Registers
- Shift registers
- Data storage
