74VHC74MTCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 55.3mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| Series | 74VHC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Base Part Number | 74VHC74 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 115MHz |
| Propagation Delay | 18 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 4.6 ns |
| Family | AHC/VHC/H/U/V |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 9.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 900μm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHC74MTCX Overview
It is packaged in the way of 14-TSSOP (0.173, 4.40mm Width). Package Tape & Reel (TR)embeds it. The output it is configured with uses Differential. It is configured with the trigger Positive Edge. Surface Mountmounts this electrical part. A 2V~5.5Vsupply voltage is required for it to operate. In the operating environment, the temperature is -40°C~85°C TA. D-Typeis the type of this D latch. JK flip flop belongs to the 74VHCseries of FPGAs. You should not exceed 115MHzin the output frequency of the device. The number of terminations is 14. You can search similar parts based on 74VHC74. It is powered by a voltage of 3.3V . The input capacitance of this T flip flop is 4pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of AHC/VHC/H/U/V. A part of the electronic system is mounted in the way of Surface Mount. 14pins are included in its design. Its clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. There is a 5.5Vmaximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be kept above 2V. Despite its superior flexibility, it relies on 2 circuits to achieve it. This D flip flop is well suited for TR based on its reliable performance. It consumes a total of 2μA quiescent current at any given time.
74VHC74MTCX Features
Tape & Reel (TR) package
74VHC series
14 pins
74VHC74MTCX Applications
There are a lot of ON Semiconductor 74VHC74MTCX Flip Flops applications.
- Frequency division
- Divide a clock signal by 2 or 4
- Computing
- Buffered Clock
- Convert a momentary switch to a toggle switch
- Clock pulse
- CMOS Process
- Automotive
- Set-reset capability
- Data storage
